The site is running in test mode

Almalyk branch of the Islam Karimov Tashkent State Technical University
Head of Department

Boboyev Xamza Xamidullayev
Senior Lecturer
Reception days
Monday - Friday
from 14:00 to 16:00
Phone
+99871 613----
+99893 186-06-03
E-mail
Xamza.boboyev@umail.uz

Department of Technology Mechanical Engineering

 

Bachelor direction: - 1. 5320200 - "Technology of mechanical engineering, equipment and automation of machine-building production" 
2. 5320300 - "Technological machines and equipment" (mechanical engineering and metalworking)

 

History of the department

Items trained on the department

Professor-teaching composition of the department

Communication department

Scientific-methodical work conducted at the department

Science articles

 

 

History of the department

The department was established by the order of the rector of the Institute of Mining and Metallurgy of the Almalyk Mining and Metallurgical Institute from June 1, 2004, 1/61, and began its activity on September 1, 2004.
The department began its activity on September 2, 2004 under the direction of candidate of technical sciences, associate professor Abdukhamid Mutalovich Mutalov, who headed the department in 2004-2006. In accordance with the order of the rector of Navoi Institute No.150 dated July 9, 2008, the Department of Mining and Mining Electromechanics is divided into two specialties "Mining" and "Mining Electromechanics".
In 2006-2011 the department was headed by the senior teacher Sultan Akkulovich Anarbayev.
In 2011, by the order of the Ministry of Higher and Secondary Special Education of the Republic of Uzbekistan, the specialty "Mining Electromechanics" was renamed to "Electrical Engineering, Electromechanics, Electrotechnology" 5310700 and later renamed the Department "Electrical Engineering, Electromechanics, Electrotechnology". . 5320200 - "Technology of machine-building, equipment and automation of machine-building industry" is in this department.
In 2011-2015, the senior teacher Muminov Makhmudjon Umurzakovich was the head of the department.
From January 2015 to August 2017, the department "Electrical Engineering, Electrical Mechanics and Electrical Technology" was headed by Ph.D. Raykhanova was headed by Galiya Eleubaevna.
According to the order of the President of the Republic of Uzbekistan dated July 27, 2017 PP-3153 №516 the department of "Electrical Engineering, Electromechanics, Electrical Technology" is divided into two specialties "Electrical Engineering and Electromechanics" and "Technology of Machine Building". The department was headed by Ph.D. GKRaykhanova is the head of the department "Technology of mechanical engineering". Bakhodir Kurbanovich Tilabov is the leader.
At present time there are 1 Ph.D., 3 associate professors, 3 senior teachers and 8 assistants in the department of "Technology of mechanical engineering". The department maintains close contacts with mining organizations. In particular, the chief specialists of JSC "AMMC" provide in-depth training to the students based on their activity. The professors and teachers of the department are working together to solve the problems that have arisen in the cabin.
In recent years, young cadres have been involved in the department, and a number of educational and methodical literature is being developed by leading and qualified lecturers, professors and teachers. The department "Technology of machine-building" actively participates in various national and international scientific conferences organized by Almalyk branch of Islam Karimov Tashkent State Technical University. Currently, the department prepares 498 bachelors in 5320200 "Technology of mechanical engineering, equipment and automation of machine-building industry" and 5320300 - "Technological machines and equipment".


Bachelor direction: 

1. 5320200 - "Technology of mechanical engineering, equipment and automation of machine-building production" 
​2. 5320300 - "Technological machines and equipment" (mechanical engineering and metalworking)


SUBJECTS OF THE DEPARTMENT OF “MACHINERY OF TECHNOLOGY”


  1. Directions MT
  2. Introduction to Direction TMJ
  3. Materials Science
  4. Material resistance
  5. Basic Welding Techniques
  6. Metallurgy
  7. Applied Mechanics
  8. Theoretical Mechanics
  9. Technological equipment of automated production
  10. Machine details
  11. Fundamentals of Mechatronics
  12. Fundamentals of mechanical engineering
  13. Mechanical Engineering (Special Course)
  14. Interchangeability standardization and technical measurements
  15. Design of mechanical assembly shops
  16. Design and production of equipment
  17. Computer Projection (CAD, CAM, CAE)
  18. Theory of machines and mechanisms
  19. Technical Mechanics
  20. Welding and deformation of metals
  21. Design of cutting tools and devices
  22. Types, voltages and deformation of welding joints
  23. Fundamentals of RDB Machine Programming
  24. Cutting Theory and Instruments
  25. Repair, assembly and use of technological equipment
  26. Deformation treatment of metals
  27. Safety guidelines
  28. Automated production technology
  29. Flexible manufacturing systems
  30. Design and production of foundry products
  31. Technical Systems Management
  32. Machine parts manufacturing technology
  33. Automation of manufacturing processes in mechanical engineering
  34. RDB process equipment
  35. Fundamentals of automation and automation of production processes
  36. RDB process equipment of flexible production systems
  37. Technology of design and production of bonding machines in mechanical engineering

TEACHERS OF THE DEPARTMENT

Tilabov Baxodir Qurbanovich
From September 2. 2017 head of the department "Technology of mechanical engineering" works as a doctor of technical sciences and From April  26, 2019 associate professor. He actively participates in teaching and research and supervises undergraduate graduate work, master's theses and doctoral dissertations.
Reception days: Tuesday-Thursday (14:00-16:00)
Tel: (+ 998 90) 959-29-59
E-mail: baxodirtilabov@umail.uz
Pedagogical activity: Introduction to Direction, Materials Science, Metallurgy, Fundamentals of Machine-building Technology.
Scientific activity: Fundamentals of high-chromium alloying and thermal treatment by modeling of gas-resistant casting for the production of refractory coatings.
Articles:

  1. Methods to increase the wear resistance of high-chromium parts by optimum alloying and heat treatment. - T .: Monograph. TashGTU, 2018 .-- 160 p.
  2. Improving working efficiency and durability of cast parts of tilling machines // European Science Review. - Vena. Austria, 2017. No. 7-8. - S. 23-27.
  3. Details of the lityx details machine and mechanisms // NTJ FerPI. - Fergana, 2017. Tom.20. No. 1. - p. 24-30.
  4. Modern innovative technologies in metallurgy and materials. NTJ Composite Materials - Tashkent, 2018. №4.
  5. New innovative technology for production of agricultural machinery parts with wearable layers. Journal of Agricultural Science. - T .: 2019. No. 1. - p. 28-32.
  6. New innovative technology of metal parts and machine-building production with energy-saving and edible coatings.
  7. International NTK on the topic "Integration of the subject - education - science and production." State Unitary Enterprise “Fan va Taraqqiiyot” - Tashkent, 2018. - S. 194-195.

Raxmanqulov Raimqul
From September 4, 2019 he has been working as a candidate of technical sciences, associate professor in the department "Technology of mechanical engineering". He is leading the research and graduate work.
Reception days: Tuesday-Saturday (13:30-15:30)
Tel: (+ 998 94) 403-31-71   
E-mail:  raxmonqulovraimqul@umail.uz
Pedagogical activity: Applied Mechanics, Machine details.
Scientific activity: Studying of wave propagation in a multi-plane semi-plane
Articles:

  1. On one problem, the implementation of finite-difference wave propagation algorithms using a mathematical package. Uzbek Scientific Research Institute of Pedagogical Sciences named after T.N. Kara-Niyazi. Collection of scientific and methodological articles. - Tashkent. 2018.- P.307-310.
  2. About rapid mapping of contaminated areas in emergency situations. Urgench branch of Tashkent University of Information Technologies named after M. Al-Khorezmi Materials of the Republican ITA. Urgench. 2018. - 346-348 p.

Nugmanov Ikrom Nugmanovich
From September 4, 2019 he is working as a candidate of technical sciences, associate professor in the department "Technology of mechanical engineering". He is leading the research and graduate work.
Reception days: Wensday-Satyrday (13:00-15:00)
Tel: (+ 998 90) 323-27-75
E-mail:  Nugmanovikromjon@umail.uz
Pedagogical activity: Materials science, Mechanical assembly shop design.
Scientific activity: High plasticity of pure iron alloys.
Articles:

  1. Combined superplastic molding and diffusion welding of titanium. Composite materials - Tashkent, 2018. No. 4., P. 83-84.
  2. Methods of obtaining parts using the effect of super plasticity. NTJ Composite materials - Tashkent, 2018. No. 4., P. 96-97.

Abduvaliyev Ubaydulla Abdullayevich
From September 5, 2019 he is working as a candidate of technical sciences, associate professor in the department "Technology of mechanical engineering".
Tel: (+ 998 94) 600-14-14
E-mail:  abduvaliyevubaydulla@umail.uz
Pedagogical activity: Theoretical Mechanics, Technical Mechanics.
Scientific activity: Increasing productivity of cotton picker by studying spindle spinning and green mass contamination.
Articles:


Ergashev Maxmud Ergashevich
From September 4, 2019 he has been working as a senior lecturer in the department of "Technology of mechanical engineering" and has been leading research and development work.
Reception days: Wednsday-Friday (14:00-16:00)
Tel: (+ 998 98) 125-26-05
E-mail:  maxmudergashovich@umail.uz
Pedagogical activity: Fundamentals of technology of mechanical engineering, Fundamentals of automated production technology, Technological equipment of automated production, Basic methods of welding, types of welding, voltage and deformation.
Scientific activity: The technology of electrocontact technique for the restoration and consolidation of details using composite matrals.
Articles: Electrocontacts of the prehistoric details of the agricultural machinery. International scientific-practical conference TIIIMSX Tashkent, 2018. pp. 778-780.


Sadullayev Zarip Sharipovich
Since January 18, 2018 has been working as a senior lecturer in the Department of "Technology of Machine Building" and has been leading the research and graduate work.
Tel: (+ 998 93) 618-46-69
E-mail:  Sadullakaugli@umail.uz
Pedagogical activity: Technology of mechanical engineering (special course), Design and manufacture of equipment.
Scientific activity:
Articles:


Holiqulov Erkin Botirovich
September 4, 2019 Senior Lecturer in the Department of Mechanical Engineering.
Reception days: Tuesday-Friday (14:30-16:30)
Tel: (+ 998 93) 629-12-54 
E-mail:  botirakaugli@umail.uz
Pedagogical activity: Resistance to materials.
Scientific activity:
Several problems related to the decay of cylindrical deformable solids.
Articles:


Boboyev Hamza Xamidullayevich
rom September 2, 2017 He has been working as an assistant in the department "Technology of mechanical engineering" and From April  26, 2019 head of the department "Technology of mechanical engineering" works. He is leading the research and graduate work.
Reception days: Monday-Thursday (14:30-16:30)
Tel: (+ 998 93) 186-06-03 
E-mail:  Xamza.boboyev@umail.uz
Pedagogical activity: Design and production of foundry, Standardization and technical measurements of interchangeability.
Scientific activity:
Articles
: Combined superplastic molding and diffusion welding of titanium. Composite materials - Tashkent, 2018. No. 4., P. 83-84.


Sherbo’tayev Jamshid Abdurazoqovich
From September 4, 2018 she has been working as an assistant in the Department of Mechanical Engineering. He is leading the research and graduate work.
Reception days: Monday-Tuesday (14:00-16:00)
Tel: (+ 998 90) 992-76-87 
E-mail:  jamshidsherbutayev@umail.uz
Pedagogical activity: Introduction to design, design and production of equipment.
Scientific activity:
Articles: Methods for producing composite materials. NTZh Composite materials. - Tashkent, 2018. No. 3. C. 45-46.


Butunov Jaxongir Ruziqulovich
From September 10, 2018 He has been working as an assistant in the department "Technology of mechanical engineering".
Reception days: Tuesday-Thursday (14:00-16:00)
Tel: (+ 998 91) 132-00-91 
E-mail:  jaxongirbutunov@umail.uz
Pedagogical activity: Theoretical Mechanics, Materials Resistance, Machine details.
Scientific activity:
Articles
: Methods of manufacturing cast details with a solid-alloy  coating and heat treatment. "КОМPOZITSION  МАТЕRIАLLAR" 95-96 pages.


Toshtemirov Kamol Qaxramonovich
From September 5, 2019 He has been working as an assistant in the department "Technology of mechanical engineering"
Reception days: Tuesday-Saturday (14:00-16:00)
Tel: (+ 998 97) 462-01-80 
E-mail:  koliya.temirov@mail.ru
Pedagogical activity: Designing and production of foundry products, Fundamentals of Mechatronics.
Scientific activity:
Articles:
Superplastic molding of sheet material. Composition Materials (No.1 / 2019, p. 105) Issn 2091-5527. Journal of Science, Technology and Practice Tashkent 2019.


Mamirov Sherzod Sherali o'g'li
From September 5, 2019 he has been working as an assistant in the department "Technology of mechanical engineering".
Reception days: Monday-Wednsday (14:00-16:00)
Tel: (+ 998 94) 424-91-23 
E-mail: mamirovsherzod7@mail.ru 
Pedagogical activity: Materials science, Metallurgy.
Scientific activity:
Articles:
"Application of carbide compositions based on Volyfram carbide by electrocontact sintering technology"At the IV International Scientific and Practical Conference, October 22-25, 2016 in Saratov, Russia.


Yusupov Xurshid Normo'min o'g'li
From September 5, 2019 he has been working as an assistant in the department "Technology of mechanical engineering".
Reception days: Tuesday-Saturday (14:00-16:00)
Tel: (+ 998 97) 725-66-95 
E-mail: xurshidyusupov@mail.ru
Pedagogical activity: Fundamentals of Mechatronics, Standardization and technical measurements of interchangeability, Technological equipment of automated production.  Scientific activity:
Articles:
Development of a complete process control system for the oil and gas industry as an example of a hydrocracking device.


Amanova Shahrizoda Luxmonjon qizi
From September 5, 2019 she has been working as an assistant in the department "Technology of mechanical engineering".
Reception days: Monday (14:00-16:00)
Tel: (+ 998 91) 164-28-24 
E-mail:  lukmonjonqizi@gmail.com
Pedagogical activity: Materials science, Machine details.
Scientific activity:
Articles:


Raxmatullayeva Shohida Mirodil qizi
rom September 5, 2019 she has been working as an assistant in the department "Technology of mechanical engineering".
Reception days: Friday (14:00-16:00)
Tel: (+ 998 97) 424-89-04 
E-mail: shohirahmatullayeva@gmail.com 
Pedagogical activity: Basic methods of welding, types of welding, tension and deformation.
Scientific activity:
Articles:


Communication department

  1. Technology of mechanical engineering department of Tashkent State Technical University;
  2. Department of “Technology of mechanical engineering”
  3. Technology of mechanical engineering department of Andijan Institute of Mechanical Engineering

ECONOMIC CONDITIONS AND GRANTS IN THE DEPARTMENT1.

SCIENTIFIC WORKS IN THE DEPARTMENT

Fundamental research work for 2018-2020


SCIENTIFIC-METHODICAL WORKS IN THE DEPARTMENT

Tutorials and Tutorials

  1. - Tilabov BK, Sherbutaev JA Educational-methodical instructions for laboratory and practical work on the subject "Materials science" (by the end of April 2019).
  2. - Tilabov BK, Nugmanov I.N. Teaching-methodical instructions for laboratory and practical training on the subject "Metal Technology" (by the end of May 2019).
  3. - Rakhmonkulov RR Educational-methodical instructions on performance of laboratory and practical work on a subject "Computer designing" (to be finished till the end of April, 2019).
  4. - Abduvaliev U.A. Teaching-methodical instructions for laboratory and practical work on the subject "Theory of machines and mechanisms" (by the end of April 2019).
  5. - Ergashev M.E. Educational-methodical instructions on performance of laboratory and practical training on a subject "Repair, assembly and use of technological equipment" (in Russian) till the end of April, 2019.
  6. - Sadullaev Z.Sh. Educational-methodical instructions for laboratory and practical work on the subject "Technology of mechanical engineering (special course)" (by the end of April 2019).
  7. - Bariev MB, Butunov JR Training manual on problem solving in theoretical mechanics (in Uzbek language) (by the end of April 2019).
  8. - EB Kholikulov, Butunov JR Training materials for laboratory and practical work on the subject "Resistance of materials" (by the end of May 2019).
  9. - Tilabov BK, Boboev H.K. Teaching manual for performing laboratory and practical work on the subject "Metal Deformation Processing" (in Uzbek language) (by the end of May 2019).
  10. - Tilabov BK, Nugmanov IN, Ergashev M., Sadullaev Z.Sh. Educational-methodical instructions for laboratory and practical training on the subject "Materials science and technology of construction materials" (by the end of May 2019 - additional)

SCIENTIFIC Articles

  1. Tilabov B.K The method of the adsorption of the viscochemistry of the details of the putem is optimal. - T .: Monograph. TashGTU, 2018. - 160 p.
  2. Tilabov B.K. Improving working efficiency and durability of cast parts of tilling machines // European Science Review. – Vena. Austria, 2017. №7-8. - S. 23-27. 
  3. Raxmankulov R. About mathematical law-finding programs based on experiments // Mining Bulletin. NDKI. Navoi, 2016. - pp. 37-40.
  4. Raxmankulov R. To the problem vibrations // Materialy Republican Technical and Technological Conference Gorno-Metallurgical Complex. Problems with i ix. Navoi. 2016. - p. 51-53.
  5. Tilabov BK New technology for production of balloons and types from edible high-yielding white iron. - TashAKI. Republican scientific and technical conference. - Tashkent, 2017. - p. 64–67
  6. Tilabov B.K The optimum melting temperature of gasified foam models and obtaining high-quality products from them. – Tashkent. Proceedings of the Republican Scientific and Technical Conference. - Tashkent, 2017. - p. 194-195.
  7. Tilabov B.K. Wear-resistant materials for cast parts of machines and mechanisms // NTZ FerPI. - Ferghana, 2017.Vol. 20. No. 1. - S. 24-30.
  8. Tilabov B.K. Optimal modes of heat-treatment to improve the abrasive wear resistance of cast machine parts. European applied sciences. ORT Publishing. – Germania. 2017. №3. - S. 35-38.
  9. Tilabov B.K. Increase the service life of cast parts tilling machines // International Conference Global science and Innovation. – USA. Chicago, 2016. - S. 222-225.
  10. Tilabov B.K. Wear resistance of constructional materials and structure of the built-up firm alloys // Materials of the X International research and practice Conference. – Westwood, Canada, 2016. - S. 180-187.
  11. Tilabov BK New innovative technology for the production of friction resistant foundations for machine-building and cement plants. Collection of materials of scientific-practical conference at the ministry level. NMQI Namangan, 2018
  12. Тилабов Б.К. Increased wear resistance and durability of cast tsilpebs made of chrome white cast iron. International Scientific and Practical Conference TIIiMSX Tashkent, 2018.
  13. Tilabov BK New innovative technology of metal parts and machine-building production with energy-saving and edible coatings. "Integration of objects - obrazovaniya - - education - science and production."". GUP Science and Development - Tashkent, 2018.
  14. Tilabov B.K. Modern innovative technologies in metallurgy and materials science. NTZh Composite materials - Tashkent, 2018. No. 4.
  15. Tilabov BK New innovative technology for production of agricultural machinery parts with wearable layers. Tashkent Agricultural Journal of Agricultural Science. - Tashkent, 2019. №1.
  16. Rakhmonkulov R. On one problem, the implementation of finite-difference wave propagation algorithms using a mathematical package. Uzbek Scientific Research Institute of Pedagogical Sciences named after T.N. Kara-Niyazi. Collection of scientific and methodological articles. - Tashkent. 2018 .-- S.307-310.
  17. Rakhmonkulov R. About rapid mapping of contaminated areas in emergency situations. Urgench branch of Tashkent University of Information Technologies named after M. Al-Khorezmi Materials of the Republican ITA. Urgench. 2018. - 346-348 b.
  18. Rakhmonkulov R.. Use the compass packet to create software for controlled machines in a digital program. Collection of materials of scientific-practical conference at the ministry level. NMQI Namangan, 2018.
  19. Nugmanov I.N., Boboev H.Kh. Methods of obtaining parts using the effect of superplasticity. NTJ Composite materials - Tashkent, 2018. No. 4.
  20. Nugmanov I.N. Current state of practical application of superplasticity of iron-based alloys. NTZh Composite materials - Tashkent, 2018. No. 4.
  21. Ergashev M., Boboev H.Kh. Contact baking during the restoration of agricultural machinery parts.International Scientific and Practical Conference TIIiMSX Tashkent, 2018
  22. Bariev M. Adoption of the MathCAD software package for solving point kinematics problems. Collection of IAC materials at the ministry level. NMQI Namangan, 2018.
  23. Kholikulov E.B.Determination of the destructive energy of a cylindrical body.Namangan Engineering Civil Engineering Institute September 27-28. - Namangan, 2018.
  24. Sherbўtaev Zh.A. Methods for producing composite materials. NTZh Composite materials. - Tashkent, 2018. No. 3.